eBox-GPIO Remote Contribution Tally and ETH Link

Robit eBox-GPIO empowers your custom control and tally with a networked GPIO contacts.
Robit eGPIO-32 Box provides a configurable GPIO device to enable flexible and scalable interconnection with external equipment.

Simply interface many devices in different geographical locations or just distribute your tally information and analog GPI signals to and from Ethernet using the Box with the powerful Robit Architect or the robust Robit Control Room Manager.
GPIO connection is available on LAN and WAN.
Robit eGPIO-32 Box is a general-purpose I/O controllers with 16 inputs and 16 outputs, electrically isolated with relays and opto-couplers and with a redundancy PSU.

16 GPO are with relays shorting to ISO-GND.
16 GPI are with optical insulators shorted to ISO-GND

If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together, through Robit Architect.

---

Robit eGPIO-16 Box is the new compact size I/O controllers with 8 inputs and 8 outputs, electrically isolated with relays and opto-couplers and with a redundancy PSU.
A very compact device that allows maximum flexibility in the GPIO tally system distribution.

8 GPO are with relays shorting to ISO-GND.
8 GPI are with optical insulators shorted to ISO-GND

eGPIO ethernet remote Link

eGPIO devices can be also used for bi-directional IP-based communication with non-ethernet devices via the GPIO ports.
It is possible to connect two (or more) devices in different geographic locations or even control legacy equipment by converting digital GPIO signals to and from ethernet.

GPIO & Tally Light