RF Router & Changeover

Professional RF Multiplexer for Testing Equipment

Bi-directional broadband RF switch 4×1 1×4 for Testing Equipment

CGRF 200 is a very flexible connection path between the device under test and the test equipment. It allows different instruments to be connected to the point on your measurements at the same time. CGRF 200 provides 4 configurable channels to 1 out (or 1 input to 4 outputs) in 1 U rack mount. SW remote via RS232 or RS485 serial link, auto timing switch or Manual source selection, so to facilitate periodic testing of system function. Most brand Router interface available. Switching technology offers broadband switching capabilities for high-frequency and pulsed signals. Front panel controls are provided for source selection and operating mode. LED indicators are provided for operating mode and channel selection. Each control command is also available via remote RS232 or RS485 connector. GPIO for remote control and status.

:. Bandwidth: Up to 3GHz
:. 4 Video RF inputs/outputs (N-type or BNC connector)
:. 1 Video RF output/input (N-type or BNC connector)
:. 1 U rack mount
:. front push button to manual select – configure the multiplexer
:. 4 Leds to display the channel selected
:. 4 GPI “close to ground” to simply remote the selected channel
:. 4 GPO “open collector” linked to the channel selected
:. SW on PC to remote, via RS232 or RS485, the equipment
:. automatic or manual operation
changeover RF