IMD200 SLIM can be mounted in front of a monitor with  our simple Tilt Down Support.
It is housed in a standard 1U case, only 3cm deep, and its operation and features are identical to a standard DYNAMIC DISPLAY.
This model of UMD can be installed where rack space is limited. Tilt Down Support allows the user to access the monitor control switches.
Available in single 20, dual 9 and single 10, triple 6 character configurations.
12VAC Power Supply with low power consumption (8VA)
 

IMD200 is an interactive display system that can CLEARLY show source identification and tally indication, using ALPHANUMERIC TRICOLOR DISPLAYS.
Because of that solution, it is possible to clearly read the displayed message from very near as well as from very far the device. The system can operate with a PC, in stand-alone, or directly follow router changes. IMD200 is modular designed so one can easily expand when required. It is also possible to assign the status by using multiple switcher/vision mixers. The device is programmable by PC using our proprietary SW so to provide automatic source identification and tally indication. The systems are individually addressable (512 different addresses) and present an auto-flash mode, with the option to alternate the message with an user-defined message (e.g. 'ON AIR'). Every programmed message is stored in an internal EEPROM so NO BATTERY-BACKUP is necessary. In the event of Power failure the system will not loose any message or setting.

• 20 ALPHANUMERIC TRICOLOR characters.
• Available in single 20, dual 9 and single 10, triple 6 characters configurations in 1U rack-mount
• low power consumption (8VA)
• brightness selection SW controlled
• 12VAC Power Supply
• The system can operate with a PC, in stand-alone, or directly follow router changes.
• 512 different addresses
• GPI are provided for messaging and error detection
• tally output from display
• tally status and source identification
• tally indication with additional led bars (optionally blinking) and/or with an user-defined message alternatively displayed by the system
• message programmability by an included SW
• SW library to directly interface most routers available
• SW for controlling and programming the system mode