CGD 200
 

On Screen Display ChangeOver System
Exhibitors @

 
UMD
Front Panel

Rear Panel

 
 
Features
CGD 200 is a ChangeOver with a 2 Analog video Signal sensing, On Screen Display of  20 characters.
The text can be positioned at the top or bottom on the screen.
Rack-frame; 1 U Rack 19” can support 2 CGD200 boards.
Every ChangeOver section, in presence of VTR Video Input Signal (VTR IN), will supply it directly to output.
In case of No Input Video Signal (ALARM CONDITION), the CHANGEOVER section switches the Input Signal(TEST IN) to the output (CGD OUT) superimposing the programmed text.

Power Supply
Voltage 220VAC, Frequency 50/60Hz, maximum Power consumption 15VA.
In case of different needs, consult Your Seller.

 
 
Technical Data
INPUT AND OUTPUTS
Return Loss >30dB to 10MHz
 >15dB,10÷300MHz
Ins. Loss 0.2dB to 180MHz		 POWER SOURCE
Mains Ranges Voltages 220VAC
Frequency 50÷60Hz
Power Consumption 15VA		 TEMPERATURE RANGE
Operating  0÷50°C		 PHYSICAL CHARACTERISTICS
Height  44mm (1.75")
Width  482mm (19")
Depth  111mm (4.41")

 
 
 
 

Home

www.robit.com
robit@robit.com		 All Robit products areCE approved

Copyright NOTICE ROBIT ®